Pay in installments of $165.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carli Suspension XDK278 2.5" Leveling SystemUpgrade the stance of your Dodge Ram 3500 with the Carli Suspension 2. 5" Leveling System CS DLVL CS 13 D. This system is designed for the customer that keeps their truck on the road with an eye for quality and appreciation for bang for their buck. Utilizing Carli SPEC 2. 0" Diameter, Internal Reservoir shocks, Carli developed a tune that delivers all around comfort and ride quality designed for on road, in town, highway, and towing hauling. The 2. 5"
Upgrade the stance of your Dodge Ram 3500 with the Carli Suspension 2.5" Leveling System CS-DLVL-CS-13-D. This system is designed for the customer that keeps their truck on the road with an eye for quality and appreciation for bang-for-their-buck. Utilizing Carli SPEC 2.0" Diameter, Internal Reservoir shocks, Carli developed a tune that delivers all-around comfort and ride quality designed for on-road, in town, highway, and towing/hauling. The 2.5" lift height doesn't require the front or rear geometry correction of their 3" Systems.
At the heart of this system is a 2.5" lift, Linear Rate Coil Spring paired to match travel mono-tube, internal reservoir, Carli SPEC 2.0. These shocks boast 6063 Aluminum construction, anodized body for corrosion resistance, 5/8" hardened steel chrome plated shaft, full serviceability & rebuilding ability and are built with 1-peice bushings in the 6061 Billet rod-ends. These shocks are specified with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation.
The rear shocks are also included with this system and have been custom tuned to maximize the ride quality for the factory rear coil springs. As the rear springs remain unmodified, load capacity is maintained while predictability is improved. For those that aren't looking for a massive increase in travel or big shocks but still desire a level stance and improved ride quality and handling characteristics, this is the perfect kit.
The front axle will be slightly pulled to the Driver's side following installation of the lift; this can be corrected with the addition of an Adjustable Track Bar. Further, ride quality can be substantially increased with the addition of the Carli Torsion Sway Bar (not included). Carli recommends a 35" tire on a wheel that's no more than 9" wide with 5.5"-6" Backspace. An 18" diameter wheel will be best to ensure optimal ride quality (more rubber = better small bump compliance) and an unloaded tire pressure of 45F/40R is recommended. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.
This system will NOT be upgradable to any other Carli Suspension Systems. It's designed to be a solution for customers wanting a quality system with minimal lift and part inclusion. Carli recommends slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops. For this reason, customers may experience a slight bow in the coil spring. Carli did not experience a coil bow in any of their test trucks but it's possible at the 2.5" lift height without a Radius Arm Drop Bracket.
Parts Included: AS-DLVLSPKG-CS20IFP-A; CS-DLRC-14-LVL-D
Required & Optional Parts To Support This System:
Sway Bar Options (REQUIRED): CS-DTSB3-1419 or CS-DSBD-14
Leaf Spring Options (REQUIRED): CS-DPAP-03-D or CS-DFSP-13-D
At the heart of this system is a 2.5" lift, Linear Rate Coil Spring paired to match travel mono-tube, internal reservoir, Carli SPEC 2.0. These shocks boast 6063 Aluminum construction, anodized body for corrosion resistance, 5/8" hardened steel chrome plated shaft, full serviceability & rebuilding ability and are built with 1-peice bushings in the 6061 Billet rod-ends. These shocks are specified with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation.
The rear shocks are also included with this system and have been custom tuned to maximize the ride quality for the factory rear coil springs. As the rear springs remain unmodified, load capacity is maintained while predictability is improved. For those that aren't looking for a massive increase in travel or big shocks but still desire a level stance and improved ride quality and handling characteristics, this is the perfect kit.
The front axle will be slightly pulled to the Driver's side following installation of the lift; this can be corrected with the addition of an Adjustable Track Bar. Further, ride quality can be substantially increased with the addition of the Carli Torsion Sway Bar (not included). Carli recommends a 35" tire on a wheel that's no more than 9" wide with 5.5"-6" Backspace. An 18" diameter wheel will be best to ensure optimal ride quality (more rubber = better small bump compliance) and an unloaded tire pressure of 45F/40R is recommended. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.
This system will NOT be upgradable to any other Carli Suspension Systems. It's designed to be a solution for customers wanting a quality system with minimal lift and part inclusion. Carli recommends slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops. For this reason, customers may experience a slight bow in the coil spring. Carli did not experience a coil bow in any of their test trucks but it's possible at the 2.5" lift height without a Radius Arm Drop Bracket.
Parts Included: AS-DLVLSPKG-CS20IFP-A; CS-DLRC-14-LVL-D
Features:
- Fits Up To 35" Tires
- Increases Wheel Travel To 9.5" Front & 11.3" Rear
- Does Not Include Leaf Spring Option And Sway Bar Option
- Corrosion Resistant Aluminum Bodies Provide Long-Lasting Finish
- System Includes Multi-Rate Front Coil Springs, Front And Rear Shock Package
- Carli-Tuned Remote Reservoir 2.0 Shocks Provide Comfortable On-Road Feel & Better Off-Road Performance
Required & Optional Parts To Support This System:
Sway Bar Options (REQUIRED): CS-DTSB3-1419 or CS-DSBD-14
Leaf Spring Options (REQUIRED): CS-DPAP-03-D or CS-DFSP-13-D
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
Quality is good considering low cost.
Color: Silver1
Good quality for an inexpensive salt/pepper grinder. Works fine and should last a reasonable time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
★★★★★ 4
Looks nice and seems to work well, but the black retaining ring randomly fell out.
Color: 1pcs-Sliver-304, Color: 1pcs-Sliver-304
The pepper grinder looks nice and initially functioned well as expected. However, as at least 9 other reviewers have noted experiencing, within 2 weeks of purchase and after very minimal usage, the black retaining ring around the grinder cone & adjustment knob just fell out when I was using the grinder, which was disappointing and indicative of poor design or construction for this part. After some research & experimentation, I was able to pop the ring back into place using needle-nose pliers (you just need something hard and narrow to push and flex the ring a bit, not necessarily pliers). I'm hoping that this is not a harbinger of other problems to come. Otherwise it's a nice grinder.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 5
Not Overly Large and Easy to Use
Color: Silver1, Color: Silver1
I’ve been looking for a salt grinder for a long time. I was hoping to find something small—closer to the disposable grinders you see at the grocery store—but those don’t really seem to be available.
So I decided to try this one, and overall I’m glad I did. I’ve included photos to give a better sense of the size compared to your store size non-refillable salt grinders, since it’s a bit larger than what I originally had in mind.
The grinder works smoothly and doesn’t require much effort to use. You can easily adjust the grind size by turning the knob on the top of the grinder, which is a nice feature.
Refilling it was also straightforward. I had no trouble pouring in coarse Himalayan salt from a larger container without making a mess.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
★★★★★ 5
Salt or pepper grinder.
Color: Silver1
Excellent product. I accidentally broke one of mine and was pleased that I was able to purchase one grinder. They’re beautiful and very well made. Grind salt and pepper easily and many different coarseness. And they are pretty.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Inexpensive but certainly not 'cheap'
Color: Silver1
These work well and feel like very good quality far in excess of what you might expect for the price. I am very happy with my purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026