iFlight Chimera5 LR Analog (PNP)

iFlight Chimera5 LR Analog (PNP)Introducing iFlights first ultra light Long Range 5 inch BNF for every terrain and beyond. This quad uses the latest SucceX E mini F7 hardware on board coupled with XING 2005 motors. If our iFlight Chimera4 is too small and light to fight against stronger winds, here you go. Get flight times above 25min using at least Li On 4S 3000mAh packs. Go crazy and strap a Li On 4S pack on and go even further, depending on capacity and weight! GPS Rescue ready

Introducing iFlights first ultra-light Long Range 5 inch BNF for every terrain and beyond. This quad uses the latest SucceX-E mini F7 hardware on board coupled with XING 2005 motors. If our iFlight Chimera4 is too small and light to fight against stronger winds, here you go. Get flight times above 25min using at least Li-On 4S 3000mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!

GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home. Betaflight OSD pre-setup GPS elements will show you the way! Custom iFlight 150mm LR antenna for best signal coverage even at long distances. Expected flight times are just estimated and are depending on your fliying style and environmental conditions (cruising, no freestyle, average speed):

Features

• Mini long-range quad
• XING 2005 2550KV Ultralight motors (Prop mount pattern currently only compatible with iFlight Nazgul Props)
• Deadcat geometry frame (higher efficiency and no props in view)
• GPS pre-installed for more safety at distance
• SucceX-E mini F7 Stack
• Naked GoPro and Full GoPro ready (included TPU base mounts)
• 360° TPU protection, Vista cam protection, and antenna mounts
• Caddx.us Ratel V2 2.1mm

Specifications

• Flight Tower: SucceX-E mini F7 FC + 35A BLHeli_S 4 in 1 ESC + 300mW VTX
• Motor: XING 2005 4S 2550KV
• Camera: Caddx.us Ratel V2 2.1mm
• VTX: SucceX Force 5.8GHz 800mW VTX Adjustable
• Wheelbase: 219mm
• Frame size: 135*173mm
• Bottom plate thickness: 2.8mm
• Arm Thickness: 4mm
• Top plate thickness: 2mm
• Propeller size: 5inch
• FPV cam spacing: 19/20mm

Tips

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Included

Pre-built and tested Quadcopter

• 1 x Chimera5 Analog PNP
• 2 x NAzgul 5030 prop (Color May Vary)
• 2 x iFlight Lipo Straps
• 2x Gopro Base Mount

Suggested Extra Parts

• Radio Control and receiver
• 4s 1300mAh lipo (if carrying a gopro) or 4s 3000mAh Lipo for high endurance cruising

Betaflight CLI File

• Chimera5 Diagrams and CLI File